Sale
Mr. JO Underlay – FLO
₹4,499.00 – ₹17,096.00 Inclusive of all taxes
Three component flowable epoxy screed
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
Three component solvent free Flowable epoxy underlay system designed for use in a wide range of floor toppings and construction bedding.
- Color: Neutral
- Pot life @25°C: 100-120 mins
- Mixing Ratio: 100:50:250 PBW
- Mixture consistency: Flowable
- Coverage: 1.8 kg/m2/mm
- Flooring
- Pavement
- Slope for drainage
- As a bedding to enhanced floor’s mechanical strength
Surface Preparation
- Remove all dust and debris by physical and mechanical means, prior to application of the product. surfaces should be freed from laitance and dust by sand-blasting.
- In case sand-blasting is not possible, thorough abrading with a hard wire brush should be preferable.
- Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
- Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
- Mix all the three components provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
- Allow 4-5 hour for surface to dry and 24 hours to achieve strength.
General Inquiries
There are no inquiries yet.
