Product - Mr. JO Tecbond-NS

Description

Two component thick solvent free non sag epoxy system suitable for repairing, cladding and laminating of concrete, stone and other construction materials.

• Color: White
• Pot life @25°C: 60-70 mins
• Mixing Ratio: 100:100 PBW
• Mixture consistency: Putty paste
• Optics: Opaque
• Non drip(up to 5mm) on overhead/vertical surface

• Structural strengthening
• Impregnation
• Fiber glass reinforcement
• Curves/ irregularities on substrate

• The mixture should be applied on a clean, rough and dry surface. For good results, it is required that the concrete surface is clean, rough and dry. This should be achieved by suitable mechanical and chemical means such as sandblasting. Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Use Part A & Part B in ratio 100:100 PBW. Mix the two components in small batches thoroughly for at least 2 minutes.
• Apply the mix on the prepared substrate directly or using proper spatula.
• When applying glass cloth or carbon fiber, place the fiber/cloth on the surface where putty has been applied. apply an over coat to impregnate the glass cloth/carbon fiber with a spatula.

General Inquiries

There are no inquiries yet.