Sale
Mr. JO Tecbond-MV
Original price was: ₹1,150.00.₹1,035.00Current price is: ₹1,035.00. Inclusive of all taxes
Two component 10 PHR medium viscosity solvent free epoxy adhesive with creep resistant properties.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
The product is a two-component medium viscosity solvent free clear epoxy adhesive designed for general bonding and electrical bonding.
- Color: Clear
- Pot life @25°C: 95-115 mins
- Mixing Ratio: 100:10 PBW
- Mixture consistency: Medium Viscous liquid
- Optics: Transparent
- Structural adhesive
- General bonding
- Industrial adhesive
Surface Preparation
- The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
- Use Jpoxy Part-A & Part-B in ratio 100:10 PBW. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
- The joint components should be assembled as soon as the adhesive has been applied.
- Allow the material to cure for at least 24 hours before putting to use.
General Inquiries
There are no inquiries yet.
