Sale

MR. JO Tecbond-EMV

MR. JO Tecbond – MV
MR. JO Tecbond-ELV

Original price was: ₹940.00.Current price is: ₹893.00. Inclusive of all taxes

Two component 10 PHR medium viscosity epoxy system for electrical potting and encapsulation.

SKU: ADH/EMV
Clear

Description

Mr. JO Tecbond-EMV is a transparent, medium viscosity adhesive made for electric work. It is a two-part epoxy system. Moreover, you can use it for many tasks, like bonding parts, insulating wires, or protecting electrical components. Additionally, it is simple to apply and used for potting, insulation, and encapsulation. As a result, it is an excellent choice for industry that need reliable adhesives.

  • Color: Clear
  • Pot life @25°C: 95-110 mins
  • Mixing Ratio: 100:10 PBW
  • Mixture consistency: Medium Viscous liquid
  • Optics: Transparent
  • Electrical insulation
  • Electrical encapsulation
  • Casting
Surface Preparation
  • The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
Application Method
  • Use Jpoxy Part-A & Part-B in ratio 100:10 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
  • The joint components should be assembled as soon as the adhesive has been applied.
  • Allow the material to cure for at least 24 hours before putting to use.
Login to Download TDS