Hot
Sale
Mr. JO Tecbond-BLV
₹788.00 – ₹11,691.00 Inclusive of all taxes
Two component 10 PHR multipurpose epoxy adhesive.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
The product is a two component solvent free multi purpose epoxy adhesive suitable for bonding material most commonly used.
- Color: Clear
- Pot life @25°C: 60-70 mins
- Mixing Ratio: 100:10 PBW
- Mixture consistency: Low Viscous liquid
- Optics: Transparent
- Relatively shorter open time
- Brush making
- Paint Roller manufacturing
- Metal, plastic & ceramic bonding
- High performance bonding
Surface Preparation
- The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface
- Use Jpoxy Part-A & Part-B in ratio 100:10 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
- The joint components should be assembled as soon as the adhesive has been applied.
- Allow the material to cure for at least 24 hours before putting to use.
General Inquiries
There are no inquiries yet.
