Product - Mr. JO Tecbond – WFN

Description

Two component solvent free dark brown color epoxy putty suitable for repairing wood or reshaping and rebuilding missing wood. It provide better dimensional for longer term.

• Color :- Dark Brown
• Pot life :- @25'C: 60-80 mins
• Mixing Ration :- 100:80 PBW
• Mixture consistency :- Thick flowable liquid
• Optics :- Opaque

• Sealings screw holes
• Windows and doorframes
• Furniture
• Woodend artifacts

• The mixture should be applied on a clean, rough and dry surface. For good results, it is required that the concrete surface is clean, rough and dry. This should be achieved by suitable mechanical and chemical means such as sandblasting. Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Use Part A & Part B in ratio 100:80 PBW. Mix the two components in small batches thoroughly for at least 2 minutes.
• Apply the mixture using spatula or trowel to achieve desired thickness.
• Allow it to cure for at least 24 hours before putting to use.

General Inquiries

There are no inquiries yet.