Product - MR. JO Tecbond – WF

Description

Mr. JO Tecbond – WF is a strong epoxy adhesive for reddish brown wood. It’s a two component, solvent-free formula, so it’s good for indoor and outdoor projects. For example, use it for repair, furniture, fixtures, or crafts. Furthermore, it’s brown and sticks really well, preventing warping. It’s versatile and can bond concrete, marble, stone, and metal. In addition, works well for ply to wood, wood to wood, particle board, hard board and block board to each other. Therefore, it’s useful for windows, doors, general bonding and repairs.

• Color :- Redish Brown
• Pot life :- @25'C: 60:80 mins
• Mixing Ration :- 100:80 PBW
• Mixture consistency :- Thixotropic paste
• Optics :- Opaque

• Sealings screw holes
• Windows and doorframes
• Furniture
• Woodend artifacts

• The mixture should be applied on a clean, rough and dry surface. For good results, it is required that the concrete surface is clean, rough and dry. This should be achieved by suitable mechanical and chemical means such as sandblasting. Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Use Part A & Part B in ratio 100:80 PBW. Mix the two components in small batches thoroughly for at least 2 minutes.
• Apply the mix on the prepared substrate directly or using proper spatula.
• Sufficient quantity of adhesive is to be applied so that bonding layer between the substrate is sufficient thick.
• Allow at least 8 hours for good bond strength.