Product - Mr. JO Tecbond – OPK

Description

The product is a two component high viscosity, non-porous solvent free, room temperature curing popular epoxy adhesive suitable for textile reeds, construction industry, light, heavy industry & general bonding etc.

• Color: Grey (Other colors available)
• Pot life @25°C: 55-65 mins
• Mixing Ratio: 100:80 PBW
• Mixture consistency: Thick flowable liquid
• Optics: Opaque

• Metal to ceramic bonding
• Metal to metal bonding
• Bonding rigid plastics
• Bond almost all kind of material
• Repair & Maintenance

• The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.

• Use Part A & Part B in ratio 100:80 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
• The joint components should be assembled as soon as the adhesive has been applied.
• Allow the material to cure for at least 24 hours before putting to use.

General Inquiries

There are no inquiries yet.