Sale
Mr. JO Tecbond – CLR40
₹675.00 – ₹12,825.00 Inclusive of all taxes
Two components clear thick 100 PHR epoxy adhesive with 40 minutes potlife
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
Two component thick non-porous solvent free clear epoxy adhesive designed for application demanding good clarity.
- Color :- Clear
- Pot life :- @25'C 35-45 mins
- Mixing Ratio :- 100:100 PBW
- Mixture consistency :- Clear think flowable liquid
- Optics :- Transprent
- Electrical insulation
- Handicraft
- Jewelry
Surface Preparation
- The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
- Use Part A & Part B in ratio 100:100 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
- The joint components should be assembled as soon as the adhesive has been applied.
- Allow the material to cure for at least 24 hours before putting to use.
General Inquiries
There are no inquiries yet.
