Product - Mr. JO Tecbond – BW

Description

The product is a two component high viscosity, non-porous solvent free, room temperature curing bright white epoxy adhesive suitable for sealing, repairing & general bonding.

• Color: Bright white
• Pot life @25°C: 55-65 mins
• Mixing Ratio: 100:80 PBW
• Mixture consistency: Flowable liquid
• Optics: Opaque

• Filling gap between bottom of commode and floor
• Filling gap between the wash basin & wall
• Repairing broken parts of household items
• Repair of floor

• The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.

• Use Part A & Part B in ratio 100:80 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
• The joint components should be assembled as soon as the adhesive has been applied.
• Allow the material to cure for at least 24 hours before putting to use.

General Inquiries

There are no inquiries yet.