Sale
Mr. JO Tecbond AWF
₹394.00 – ₹7,486.00 Inclusive of all taxes
Two components 80 PHR epoxy adhesive for beige wood
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
Two component solvent free beige color epoxy adhesive suitable for wood furniture and fixtures. It provide better dimensional for longer term.
- Color :- Beige
- Pot life :- @25'C: 70:90 mins
- Mixing Ration :- 100:80 PBW
- Mixture consistency :- Think flowable liquid
- Optics :- Opaque
- Sealings screw holes
- Windows and doorframes
- Furniture
- Woodend artifacts
Surface Preparation
- The mixture should be applied on a clean, rough and dry surface. For good results, it is required that the concrete surface is clean, rough and dry. This should be achieved by suitable mechanical and chemical means such as sandblasting. Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
- Use Part A & Part B in ratio 100:80 PBW. Mix the two components in small batches thoroughly for at least 2 minutes.
- Apply the mix on the prepared substrate directly or using proper spatula.
- Sufficient quantity of adhesive is to be applied so that bonding layer between the substrate is sufficient thick.
- Allow at least 8 hours for good bond strength.
General Inquiries
There are no inquiries yet.
