Sale
Mr. JO Tecbond – ASG
₹671.00 – ₹12,749.00 Inclusive of all taxes
Two component 80 PHR epoxy adhesive with quick surface drying.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
The product is a two-component solvent free multi purpose epoxy adhesive with faster drying time suitable for bonding material most commonly used.
- Color: Yellow
- Pot life @25°C: 45-60 mins
- Mixing Ratio: 100:80 PBW
- Mixture consistency: Thick liquid
- Optics: Translucent/Opaque
- Fast surface drying
- Art & craft
- Household repairing
- Sports good manufacturing
- Bonds underprepared substrate
Surface Preparation
- The mixture should be applied on a clean and oil free surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
- Use Part A & Part B in ratio 100:80 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
- The joint components should be assembled as soon as the adhesive has been applied.
- Allow the material to cure for at least 24 hours before putting to use.
General Inquiries
There are no inquiries yet.
