Placeholder

MR. JO Matrix – SF

MR. JO Tecbond – LV50

SKU: N/A

This product is currently out of stock and unavailable.

Description

MR. JO Matrix – SF is a two-part epoxy resin with medium thickness. It is solvent-free and cures at room temperature. You can use it with carbon fiber or glass fiber to make strong composite parts. Also, it spreads well and forms a tight, smooth layer. So, it’s a great pick for making high-strength parts

  • Cures at Room Temperature
  • Excellent Adhesive strength
  • Does not require primer
  • Good mechanical properties
  • High impregnation on fabric and tapes
  • Good wetting property
  • Good resistance to dynamic loading
  • Bonds a wide variety of materials in common use
  • Solvent Free
  • The product is an effective solvent free epoxy system with favorable combination of viscosity and pot life required for flowability and proper wetting of fiber resulting in enhanced toughness of cured system.
  • It can be used as structural adhesive along with glass or carbon fiber.
  • When used with tapes and fibers, system is compatible with high aerial weight.
Surface Preparation
  • Surface should be clean and dry. Ensuring the surface is free from 0il, grease, any curing compound or releasing agent for proper adhesion. In case of concrete loose particle should be removed and should be repaired with epoxy putty. Ensure the pinholes and undulations are properly sealed.
Application steps
  • Apply with a roller or trowel on the surface to be strengthened, properly prepared and not wet. For fabrics impregnation is recommended to use saturator
  • Apply the reinforcement tape or fabric, taking care to arrange the fibers taut and wrinkle free while protect hands with waterproof gloves.
  • Roll the surface with spiked rollers ensuring the proper impregnation. Install a second resin layer to complete saturation and incorporation of the reinforcement.
  • Repeat several times stratification as defined in the project. Do not exceed recommended maximum thickness provided for this product. Any overlap must be carried out on partially hardened system within the times reported in this TDS to ensure chemical bond between the two layers. Where it’s necessary to adhere to the cured reinforcement system with plaster or other building systems, add dusting granulated quartz (0.7-1.2mm) to the system surface when is not completely hardened.
Login to Download TDS