Product - Mr. JO Floor – CRSL1

Description

Three component solvent free 1 mm self level Epoxy flooring system designed for use in a wide range of floorings & floor toppings in medium traffic environment. . It provides a seamless, dense, impervious, high strength surface which is resistant to mild chemicals.

• Color: Neutral | Factory Pigmented
• Pot life @25°C: 20-40 mins
• Mixing Ratio: 100:50:150 PBW
• Good Chemical resistant
• Mixture consistency: Self levelling
• Thickness: 1 mm
• Coverage: 1.6 kg/m²

• Area prone to chemical spillage
• Laboratory
• Industrial floors
• Area prone to oil spillage

• Surfaces should be freed from laitance and dust by sand-blasting. In case sand blasting is not possible, thorough abrading with a hard wire brush should be preferable.
• Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
• Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
• An underlay is suggested if the substrate is badly damaged or is prone to high level of mechanical abrasion. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Underlays.
• Mix all the three components provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
• Allow 5-6 hour for surface to dry and 24 hours to achieve full strength flooring.

General Inquiries

There are no inquiries yet.