Sale

Mr. JO Floor – CRSL 0.5

Mr. JO Floorkot – AS
Mr. JO Floor – SL1

₹4,811.00 – ₹18,282.00 Inclusive of all taxes

0.5mm chemical resistant epoxy flooring

SKU: FNC/CRSL0.5
Clear
  Ask a Question

Description

Three component solvent free 0.5 mm self level Epoxy flooring system designed for use in a wide range of floorings & floor toppings in light traffic environment. It provides a seamless, dense, impervious, high strength surface which is resistant to mild chemicals.

  • Color: Neutral | Factory Pigmented
  • Pot life @25°C: 20-40 mins
  • Mixing Ratio: 100:50:120 PBW
  • Self levelling
  • Thickness: 0.5mm
  • Coverage: 0.8 kg/m2
  • Area prone to chemical spillage
  • Laboratory
  • Industrial floors
  • Area prone to oil spillage
Surface Preparation 
  • Surfaces should be freed from laitance and dust by sand-blasting. In case sandblasting is not possible, thorough abrading with a hard wire brush should be preferable.
  • Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
Application Method 
  • Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
  • Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
  • An underlay is suggested if the substrate is badly damaged or is prone to high level of mechanical abrasion. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Underlays.
  • Mix all the three components provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
  • Allow 5-6 hour for surface to dry and 24 hours to achieve full strength flooring.
Login to Download TDS

General Inquiries

There are no inquiries yet.