Sale
Mr. JO Bondkot – WHT
₹918.00 – ₹17,100.00 Inclusive of all taxes
Two component 50 PHR white color epoxy system for joint filling of marble floor.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
Two component clear transparent solvent free epoxy system suitable for joint filling of marble floors in place of white cement.
- Color: White
- Pot life @25°C: 20-40 mins
- Mixing Ratio: 100:50 PBW
- Mixture consistency: Low viscosity liquid
- Marble joint filling
- Optics: Translucent/opaque
- Marble floor Joint filler
- Marble crack repair
- Gap filling
Surface Preparation
- The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
- Use Jpoxy Part-A & Part-B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or by using brush/roller to the pretreated surfaces.
- Allow the material to cure for at least 24 hours before putting to use.
General Inquiries
There are no inquiries yet.
