Sale

Mr. JO Bondkot – STD

Mr. JO Bondkot – CLR
Mr. JO Tecseal – CRP

₹1,080.00 – ₹16,731.00 Inclusive of all taxes

Two component 50 PHR solvent free standard epoxy bonding agent.

SKU: ADH/STD
Clear
  Ask a Question

Description

Two component medium viscosity solvent free epoxy system suitable for concrete bonding, structural rehabilitation with salt water resistance properties.

  • Color: Pale yellow
  • Pot life @25°C: 40-65 mins
  • Mixing Ratio: 100:50 PBW
  • Mixture consistency: Medium viscosity liquid
  • Filler loading possible
  • Optics: Transparent/Translucent
  • Old to new concrete bonding
  • Crack sealing
  • Primer
Surface Preparation
  • The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
Application Method
  • Use Jpoxy Part-A & Part-B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or by using brush/roller to the pretreated surfaces.
  • Allow the material to cure for at least 24 hours before putting to use.
Login to Download TDS

General Inquiries

There are no inquiries yet.