Sale
Mr. JO Bondkot – LVC
₹4,950.00 – ₹18,810.00 Inclusive of all taxes
Two component, low viscosity old to new concrete epoxy bonding agent.
- Description
- Properties
- Applications
- How To Use
- Technical Data Sheet(TDS)
- FAQs
Description
Two component low viscosity solvent free epoxy system suitable for concrete bonding, structural rehabilitation with salt water resistance properties.
- Color: Pale yellow
- Pot life @25°C: 100-120 mins
- Mixing Ratio: 100:50 PBW
- Mixture consistency: Medium viscosity liquid
- Optics: Transparent/Translucent
- Filler loading possible
- Adhesion promoter
- Sealer coat
- Protective coating
- Screed
Surface Preparation
- The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.
- Use Jpoxy Part-A & Part-B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or by using brush/roller to the pretreated surfaces.
- Allow the material to cure for at least 24 hours before putting to use.
General Inquiries
There are no inquiries yet.
