Product - Mr. JO Bondkot-HV

Description

Two component high viscosity solvent free filled epoxy system suitable for concrete bonding, structural rehabilitation with saltwater resistance properties.

• Color: Grey
• Pot life @25°C: 60-80mins
• Mixing Ratio: 100:40 PBW
• Mixture consistency: Thick floppy liquid
• Optics: Opaque
• Damp, moist and underprepared substrate curing

• Segment Bonding
• Construction Joints
• Precast Bonding
• Old to new concrete bonding

• The mixture should be applied on a clean, rough and dry surface.
• This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching.
• Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.

• Use Jpoxy Part-A & Part-B in ratio 100:40 PBW. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
• The joint components should be assembled as soon as the mix has been applied.
• Allow the material to cure for at least 24 hours before putting to use.

General Inquiries

1 Inquiries