Product - Mr. JO Protectokot- BLK

Description

Mr. JO Protectokot – BLK is a two-part epoxy coating. It is solvent-free and non-porous. It has medium thickness and resists chemicals. Moreover, it blocks water and keeps surfaces safe. As a result, it lasts long and works in many places. In addition, it is great for effluent plants, chemical zones, and terraces. Furthermore, it is easy to use and low-cost. That is why many industries trust it for protection.

• Color: Black
• Pot life @25°C: 25-35mins
• Mixing Ratio: 100:100 PBW
• Mixture consistency: Brush able liquid
• Excellent saline water resistant
• Coverage : 4 m²/kg/coat
• Optics : Opaque

• ETP plants
• Tank inner lining
• Waterproofing
• Corrosion protection

• The mixture should be applied on a clean and rough surface. For good results, it is required that the substrate is free from loose particles
• Suitable degreasing agent should be used to remove any grease, oil or traces on the surface

• Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
• Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
• Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix using brush or spatula to the pretreated surfaces
• Allow 4-5 hours for surface to dry and 24 hours to achieve full strength.