Product - Mr. JO Lami-HV

Description

Two component medium viscosity, Solvent free, laminating epoxy system for laminating on base metal models & electrical applications.

• Color: Clear
• Pot life @25°C: 100-150mins
• Mixing Ratio: 100:10 PBW
• Mixture consistency: Low Viscous liquid
• Optics: Transparent

• Glass fiber laminates
• Lamination tools
• Composites

• Surfaces should be freed from laitance and dust by sand-blasting. In case sand blasting is not possible, thorough abrading with a hard wire brush should be preferable
• Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Take small quantities of laminating resin and hardener parts by weight as recommended.
• Mix the two components together thoroughly for at least 2 minutes so as to achieve uniform mixing and thorough consistency of the mix.
• Lay the 100-650 GSM of glass fiber/carbon fiber on the surface to be covered, apply 2 or 3 coats of the mixture again. The laminating resin can be poured directly from the mixing can onto the fiberglass/carbon fiber and spread around with the paint roller/brush.
• Allow it to cure for the given cure time to get the desired results.
• Apply casting system.

General Inquiries

There are no inquiries yet.