Product - MR. JO Tecbond – LV50

Description

MR. JO Tecbond – LV50 provides strong and reliable bonding for brushes and rollers. It uses a 50 PHR ratio and a solvent-free formula, making it both effective and eco-friendly. Also, its low viscosity makes it easy to apply, helps it flow smoothly, and lets it soak in deeply. As a result, it forms a tough and long-lasting bond. Whether you are working on detailed brush jobs or large-scale production, you can count on it for consistent, high-quality results. Also, it lowers harmful emissions and helps keep your workspace cleaner and safer.

• Cures at Room Temperature
• Excellent Adhesive strength
• Good mechanical properties
• Clear appearance
• Bonds a wide variety of materials in common use

• Brush bonding
• Paint roller manufacturing
• Cracks and gap sealing
• Potting

• The mixture should be applied on a clean, rough and dry surface. This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching. Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.

• Use Jpoxy Part-A & Part-B in ratio 100:50 pbw. Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
• The joint components should be assembled as soon as the adhesive has been applied.
• Allow the material to cure for at least 24 hours before putting to use.