Sale

Mr. JO Inject – UPS

Mr. JO Inject – LV
Mr. JO Bondkot – STD

₹1,148.00 – ₹19,494.00 Inclusive of all taxes

Two component low viscosity 40 PHR epoxy injection  grout system for damp, moist and underprepared surfaces

SKU: INJ/UPS
Clear
  Ask a Question

Description

Two component low viscosity solvent free epoxy injection grout for wet, damp areas and also suitable for repairing of small cracks and damaged concrete in structural applications.

  • Color: Pale yellow
  • Pot life @25°C: 20-30 mins
  • Mixing Ratio: 100:40 PBW
  • Mixture consistency: Low viscosity liquid Damp, moist and underprepared substrate curing
  • Optics: Transparent / Translucent
  • Wide gap filing under wet/ damp condition
  • Honey comb
  • Structural strengthening
Surface Preparation
  • The mixture should be The system should be applied on a clean and rough surface. For good results, it is required to clean the area of debris, loose particles, damaged concrete and prepare the surface for the epoxy treatment.
Application Method
  • Fix nipples for injection grouting in the damaged portions using epoxy mortar.
  • Fix the remaining gaps and holes with same mortar.
  • Use Part A & Part B in ratio 100:40 pbw. Mix the two components in small batches thoroughly for at least 2minutes.
  • Begin the injection process by slowly pumping the grout into the nipples using the injection pump. Continue injecting the grout until the cracks or voids are completely filled, and the grout begins to flow out of adjacent nipples.
  • Allow the material to cure for at least 24 hours before putting to use.
Login to Download TDS

General Inquiries

There are no inquiries yet.