Sale

Mr. Floorkot – CMR

Mr. JO Underlay – CMR
Mr. JO Floorkot – YLW

₹3,839.00 – ₹14,588.00 Inclusive of all taxes

Two component chemical resistant epoxy coating

SKU: FNC/CMR
Clear
  Ask a Question

Description

Two component medium viscosity high build solvent free epoxy system for the floor which are exposed to solvents, oils, chemicals acids and saline water.

  • Color: Pigmented
  • Pot life @25°C: 20-40 mins
  • Mixing Ratio: 100:20 PBW
  • Good Chemical resistant
  • Mixture consistency: Flowable liquid
  • Coverage: 4 m2/kg/coat
  • Optics: Opaque
  • Area prone to chemical spillage
  • Laboratory
  • Industrial floors
  • Area prone to oil spillage
Surface Preparation 
  • Surfaces should be freed from laitance and dust by sand-blasting. In case sand blasting is not possible, thorough abrading with a hard wire brush should be preferable.
  • Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.
Application Method
  • Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
  • Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
  • Mix all the two components provided in kit thoroughly for at least 2minutes. Apply the mix directly by pouring and spreading with the help of trowel.
  • Allow 5-6 hour for surface to dry and 24 hours to achieve full strength coating.
Login to Download TDS

General Inquiries

There are no inquiries yet.