Product - Mr. JO Protectokot – CR

Description

Mr. JO Protectokot – CR is a two-part epoxy. It is solvent-free and medium thickness. Moreover, it stops chemical damage and protects fiber glass. As a result, it keeps industrial and construction sites safe. In addition, it stays strong in tough conditions. Furthermore, it is easy to apply and lasts long. That is why many industries use it for protection.

• Color: Brownish yellow
• Pot life @25°C: 90-120 mins
• Mixing Ratio: 100:60 PBW
• Good Chemical resistant
• Mixture consistency: Flowable liquid
• Coverage: 4 m²/kg/coat
• Optics : Transparent/Translucent

• Anti corrosive coating
• Industrial equipment
• Area prone to chemical spillage

• The mixture should be applied on a clean and rough surface. For good results, it is required that the substrate is free from loose particles.
• Suitable degreasing agent should be used to remove any grease, oil or traces on the surface.

• Repair the surface if damaged. Allow 2-3 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Adhesives for repairing.
• Apply primer for better adhesion on substrate. Allow 4-5 hours for surface of repaired area to dry. Choose a suitable product from Jpoxy’s JO range of Primers.
• Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix using brush or spatula to the pretreated surfaces.
• Allow 4-5 hours for surface to dry and 24 hours to achieve full strength.