Product - Mr. JO Tecbond-GLS

Description

Mr. JO Tecbond-GLS is two part solvent-free epoxy adhesive with best surface bonding. It is great for both household application and industrial work. Also, It bonds metal, plastic, concrete, and ceramic with its strong formula. The adhesive also protects against chemicals and water. Plus, it sets quickly at room temperature with ease, making it simple to use. This makes it a good choice for small fixes and big projects, giving you durable and solid results.

• Color: Pale yellow (Other colors available)
• Pot life @25°C: 80-100 mins
• Mixing Ratio: 100:80 PBW
• Mixture consistency: Medium viscous flowable liquid
• Adhesive Strength*: >1 Kg /sq. mm (*Aluminum to Aluminum 25mm X 25mm area Lap joint)
• Optics: Translucent/Opaque

• Encapsulation/potting
• Structure & interior
• Component repair & pasting
• Bolt anchoring
• Concrete- Rebar extension

• The mixture should be applied on a clean,rough and dry surface.
• This should be achieved by suitable mechanical and chemical means such as sandblasting Wire brushing or chemical etching.
•  Suitable degreasing agent should be used to remove any grease, or oil traces on the surface.

• Use Part A & Part B in ratio 100:80 pbw.
• Mix the two components in small batches thoroughly for at least 2minutes. Apply the mix directly or using proper spatula to the pretreated surfaces.
• The joint components should be assembled as soon as the adhesive has been applied.
• Allow the material to cure for at least 24 hours before putting to use.

General Inquiries

There are no inquiries yet.